top of page
Search

What is Reolink default password

  • Writer: Administrator A
    Administrator A
  • 1 day ago
  • 3 min read

What is the Reolink Default Password? The 2026 Security Guide

In the world of modern surveillance, "default passwords" are becoming a thing of the past. At Cleveland Security Cameras, our cybersecurity and engineering teams often receive calls from neighbors asking how to log into their new Reolink systems for the first time.

If you are setting up a Reolink camera or NVR in 2026, here is the technical breakdown of what you need to know about credentials and secure access.

The Short Answer: There Isn't One (And That’s Good!)

Unlike older legacy systems that shipped with "12345" or "password," modern Reolink hardware follows a "Blank-Start" protocol to ensure your security from the moment you plug it in.

  • Default Username: admin (case-sensitive, lowercase)

  • Default Password: (Leave it Blank)

During your initial setup—whether you are using the Reolink App, the PC Client, or a monitor connected directly to your NVR—the system will recognize the blank password and immediately force you to create a unique, strong password before you can view any live video.

How to Access Your System for the First Time

Our System Design Department recommends the following workflow for a seamless first-time login:

  1. Direct Connection: Connect your camera to your network (via PoE or WiFi).

  2. Launch the Software: Open the Reolink App or Client.

  3. Find the Device: The software will scan your network and find the "Uninitialized" camera or NVR.

  4. Login: Enter admin as the username and leave the password field completely empty.

  5. Secure the System: You will be prompted with a "Create Password" screen.

What to Do If the "Blank" Password Doesn't Work

If you are prompted for a password and "blank" doesn't work, it usually means the device has been previously configured. Our Field Support Team suggests these two solutions:

1. Check the Physical Label

Some specialized or older Reolink models may have a temporary password printed on the sticker (usually found on the bottom of the camera or the back of the NVR). Look for a "Default PW" or "Setup Key."

2. Perform a Hard Factory Reset

If the device was previously owned or you've forgotten the password you created, you must perform a factory reset to return it to the "blank" state.

  • The Procedure: Locate the physical reset button (usually near the SD card slot), hold it for 10 seconds while the device is powered on, and wait for the reboot chime.

  • The Result: The username will return to admin and the password will be blank once again.

2026 Security Best Practices

At Cleveland Security Cameras, we don't just want your system to work; we want it to be unhackable. Our Cybersecurity Specialists recommend these three steps for every Reolink installation:

  • Complexity over Length: Use a password that is at least 10 characters long, mixing uppercase, lowercase, and special symbols.

  • Disable "Auto-Login": For high-security environments, ensure that every device requires a manual login rather than saving credentials.

  • Two-Factor Authentication (2FA): If you are using the Reolink Cloud for storage, always enable 2FA to ensure only authorized users can access your footage from the web.

Expert Support for Your Cleveland Property

Whether you are securing a retail shop in Independence or your family home on Lorain Ave, the team at Cleveland Security Cameras is here to ensure your technology is set up for maximum "Peace of Mind." From scalable system design to high-speed networking, we handle the technical details so you don't have to.

Need help configuring your Reolink system? Call our engineering desk today: ### 216-333-8245

This Reolink initial login and password setup guide is a perfect visual companion, showing you exactly what the "Create Password" prompt looks like on the 2026 software interface.


 
 
 

Comments

bottom of page