What is Honeywell Default Password.
- Administrator A
- 5 days ago
- 2 min read
Finding the default password for Honeywell devices can be tricky because it depends on the specific product line. Honeywell has updated its security protocols, so while older models have set defaults, newer "30/35/60 Series" cameras often require you to create a password during the initial setup.
Here are the standard default credentials for Honeywell DVRs, NVRs, and IP cameras.
1. Common Default Credentials
For most Performance Series and older IP cameras, try these first:
Username: admin (case-sensitive)
Password: 1234
Default IP: 192.168.1.108 or 192.168.0.10
2. Honeywell NVR & DVR Defaults
MAXPRO NVR Series: * Username: Administrator (case-sensitive)
Password: Password1
Secondary/Non-Windows User: admin / trinity
Performance/30/35 Series NVRs: * Username: admin
Password: Usually requires a password to be set upon the first power-up. If it was already set and forgotten, look for a "Forgot Password" link on the login screen to use security questions or a reset email.
3. Niche/Legacy Defaults
Older "administrator" login: Some units use administrator as the username with the password 1234.
W-Box (Honeywell OEM): admin / wbox123
What to do if these don't work?
If the default 1234 or Password1 fails, the password has likely been changed. You have two options:
Honeywell Config Tool: Install the "Unified Tool" or "Honeywell Config Tool" on a PC connected to the same network. This can often discover the camera and provide a path to reset or "initialize" the device if it's still in a factory state.
Physical Reset: As mentioned in the recovery guide, hold the physical reset button for 12–15 seconds while the unit is powered on. This will force the device back to the admin / 1234 default.
Expert CCTV Help in Cleveland
If you are locked out of your Honeywell system or need to integrate older cameras with a new recorder, our team can provide on-site technical support.
For professional installation and repair:
Phone: 216-333-8245