How to Reset Annke Password: How to Unlock Your DVR/NVR Account

Administrator A
Jul 14
5 min read

You walk over to your monitor or open the app, ready to check last night’s footage, only to hit a login screen that won’t let you in. For many Annke users in Cleveland and across Northeast Ohio, this frustrating moment happens more often than you’d think. Whether the password was set by a previous installer, changed during an update, or simply forgotten, being locked out of your Annke DVR or NVR can leave you feeling helpless.

The good news is that there are several proven ways to reset your Annke password and unlock your account. In this guide, we’ll walk you through the most effective methods step by step so you can regain access to your security system safely.

Why Annke Users Often Need to Reset Their Password

Annke has become a popular budget-friendly choice for homeowners and small businesses. Many systems were installed during new construction or by previous property owners, which means the original password may never have been shared.

Additionally, firmware updates, power outages, or someone accidentally changing settings can lock users out. Knowing how to properly reset your Annke password helps you avoid unnecessary stress and potential security risks.

Common Annke Default Passwords

Before performing a full reset, try these common default credentials that work on many Annke DVRs and NVRs:

Username	Password	Notes
admin	12345	Most common default on older Annke systems
admin	admin	Sometimes used on early models
admin	123456	Found on some mid-range Annke DVRs
admin	(blank)	Leave the password field empty

If none of these work, it’s time to move on to the reset methods below.

Method 1: Reset Annke Password Using the Annke App

Many newer Annke systems can be managed through the official Annke app or similar viewing apps:

Open the Annke app (or the app you normally use to view your cameras) on your phone.
On the login screen, look for and tap “Forgot Password” or “Reset Password”.
Enter the email address or phone number linked to your Annke account.
Check your email or messages for a verification code or reset link.
Follow the instructions to create a new secure password.

This method is the easiest when it works, especially if you originally set up the system with an email address.

Method 2: Reset Annke Password Through the Web Browser

If you can access your Annke NVR or DVR on the same local network, try resetting the password through a web browser:

Find the IP address of your Annke NVR/DVR (you can usually find it using the device’s search tool or by checking your router).
Type the IP address into your web browser and press Enter.
On the login page, click “Forgot Password” if the option is available.
Follow the on-screen prompts, which may include answering security questions or verifying via email.
Create and confirm your new password.

Method 3: Hard Reset Your Annke DVR or NVR

When the app and web methods don’t work, a physical hard reset is often the most reliable solution:

Steps to Hard Reset Annke DVR/NVR:

Locate the small Reset button on the back or front panel of your Annke DVR or NVR (it’s usually a tiny pinhole).
Make sure the device is powered on.
Use a paperclip or pin to press and hold the Reset button for 10 to 15 seconds.
Release the button when you see the lights flash or hear a beep.
Wait for the device to fully reboot (this can take 1–3 minutes).
After rebooting, try logging in using the common default credentials listed earlier.

Important Warning: A hard reset will return your Annke DVR or NVR to factory settings. This means you will lose custom configurations such as recording schedules, motion detection zones, and network settings. However, video footage stored on the hard drive is usually preserved.

Method 4: Reset Individual Annke Cameras

If you only need to reset one camera (not the entire NVR):

Find the reset pinhole on the camera body.
Press and hold the reset button for 10–15 seconds while the camera is powered.
Wait for the camera to reboot and the lights to stabilize.
Re-add the camera to your NVR or app using the default login credentials.

How to Change Your Annke Password After Gaining Access

Once you successfully log into your Annke system, change the password right away:

Go to System > User Management or Account Settings.
Select the admin user account.
Choose the option to change or reset the password.
Create a strong new password (combine uppercase, lowercase, numbers, and special characters).
Save the changes and store the new password securely.

Pro Tips for Annke Users in Cleveland

If your Annke system is several years old, consider whether an upgrade makes sense. Newer systems offer better remote viewing, improved video quality, and stronger security features.
Always change default passwords immediately after resetting. Leaving “admin / 12345” active makes your system vulnerable.
Keep your Annke firmware updated when possible to avoid compatibility issues and security gaps.
For complex resets or if you’re worried about losing important settings, professional help can save time and prevent mistakes.

FAQ: Resetting Annke Password

Will a hard reset delete my recorded footage? In most cases, no. Video stored on the hard drive inside your Annke NVR or DVR usually remains after a reset. However, all settings and configurations will return to factory defaults.

What if I can’t find the reset button on my Annke device? Check the back panel, sides, and bottom of the device. On some models, the reset button is inside a small hole near the power or network ports.

Can I reset my Annke password without losing my settings? Yes, if the “Forgot Password” feature in the app or web interface works. A hard reset should only be used as a last resort.

Is Annke still a good brand in 2026? Annke offers affordable options that work well for many homeowners. However, if your current system is outdated or giving you frequent problems, upgrading to a more modern platform may be worth considering.

Need Expert Help with Your Security Cameras in Cleveland?

Whether you’re locked out of your system, need a professional installation, want to upgrade to NDAA-compliant cameras, or require remote troubleshooting support — the team at Cleveland Security Cameras is here to help.

Our local experts can:

Install new security camera systems
Reset and recover access to existing cameras and NVRs
Upgrade or replace restricted/outdated equipment
Provide remote support and ongoing maintenance

Call us today at 2163338245

We proudly serve homeowners and businesses across Cleveland and Northeast Ohio with reliable, professional security solutions.